Branson krass X3000
Class D
Specifications:
Output Power (14.4v)(When bridging the channels)
1 x 8,000 watts Max (@ 2 ohm)
1 x 3,000 watts RMS (@ 2 ohm THD+N < 3.5%)
1 x 2,000 watts RMS (@ 4 ohm THD+N < 2%)
Up to 1 x 3,400 watts RMS (@ 2 ohm)
Up to 1 x 2,500w watts RMS (@ 4 ohm)
Output Power (14.4v)
(When using both channels individually)
2 x 4,000 watts Max (@ 1 ohm per channel)
2 x 1,500 watts RMS (@ 1 ohm per channel THD+N < 3%)
2 x 950 watts RMS (@ 2 ohm per channel THD+N < 2%)
2 x 600 watts RMS (@ 4 ohm per channel THD+N < 3%)
2 x 560 watts RMS (@ 4 ohm per channel THD+N < 1%)
Frequency response 10 Hz ~ 200 Hz
Subsonic Filter Frequency Range 20 ~ 50 Hz (Adjustable)
Low Pass Filter Frequency Range 40 ~ 180 Hz (Adjustable)
Bass Boost Frequency Range 45 Hz
Input Impedance 67 Kohm
Input sensitivity 0.2 V ~ 5 V
Signal/Noise Ratio (A. Wtg)
Damping Factor(100 Hz @ 4 ohm)>120
Efficiency82%
Total Harmonic Distortion (THD)4 ohm loaded 1 Watt 0.20%
800w RMS 0.50%
80% of total 0.70%
Idle Current 2.4 A
Max Peak Current240 A
Minimum Subwoofer impedance Each channel individually 1 ohm
Minimum Subwoofer impedance when in bridge mode 2 ohm
Power supply DC 12V
Dimensions (length x width x height) 60 x 195 x 832
Hinnaks 250e